Touchpad Reader; Mounting The Touchpad Reader; Battery Replacement; Low-Battery Indication - Mul-t-lock ENTR User Manual

4. Touchpad Reader

4.1 Mounting the Touchpad Reader

Select the location where the Touchpad Reader will be
mounted.
• Attach the Touchpad Reader baseplate to the wall.
• Use 4 screws and screw anchors, or double sided
adhesive strip.

4.2 Battery Replacement

1. Release lid screw and open the lid.
2. Insert new batteries (2xAA) according to
the "+" "-" signs.
3. Close the lid and tighten the screw.
4. Touch [#] for 5 seconds.
Notes:
• A short beep sound emitted and
a green [OK] indication is illuminated
for 2 seconds.
Important: Do not touch the Touchpad
during the self-test procedure and until the
indication lights are off.

4.2.1 Low-battery Indication

When batteries need recharging, a red warning signal will blink rapidly and long beep
will sound during every lock/unlock action.
ENTR® User Manual
21