Door Configuration - Mul-t-lock ENTR User Manual

3.2 Door Configuration

The door configuration process sets your lock and door preferences.
This process should be done after successful installation of the lock. It will take 15-20
seconds to complete.
1
Important: Verify that the door is
shut and no key is inserted into the
cylinder during configuration steps.
4
Numeric buttons illuminated
Type [PIN Code] [#]
Numeric buttons blinking.
ENTR® on left
side of the door
Press [1]
ENTR® User Manual
2
Touch screen with palm or fingers
for 3 seconds to active.
5
Press [1] or [3] to configure ENTR®
side (see illustration).
Press [1] for ENTR® on left side.
Press [3] for ENTR® on right side.
3
Press [Cfg]
ENTR® on right
side of the door
Press [3]
13