Add User - Mul-t-lock ENTR User Manual

6.9 Add User

The unit support up to 20 users. For each user, two different fingerprints and one PIN
code. Use different user name for each user.
1
SETTING
USERS
Press [OK]
User name exists
USERNAME
EXIST
Same user name.
Choose different user
name
2nd finger added
SUCCESS
2 nd FINGER
32
2
USERS
ADD USER
Press [OK]
5
ADD USER
SET FINGER
Press [OK] to set a finger
or use [8 ▼ ] or [2 ▲ ] in
order to set a code only.
8
ADD USER
SET CODE
*-NO OK-YES
Press [OK] for YES or [ ]
*
for NO
Matched Codes
SUCCESS
SET CODE
3
2nd MASTER?
*-NO OK-YES
Choose [OK] to add 2nd
Master User or [ ] to
*
add a user.
Note: This screen will
not appear if two Master
Users are defined.
6
SWIPE
1 ST FINGER
Swipe 1st finger several
times over fingerprint
scanner until two
confirmation beeps sound
9
ENTER CODE
ENTER CODE
******
4-10 digits
Type [CODE] [OK]
Mismatched
Codes
FAILED
INVALID
Process did not complete.
All data typed in will be
erased from memory.
4
USERNAME
JENNIFER
Type [USER NAME]
[OK]
1st finger added
SUCCESS
1 ST FINGER
10
RETYPE CODE
******
4-10 digits
Retype [CODE] [OK]
ENTR® User Manual
User name added
USER #08
JENNIFER
User name added
7
SWIPE
2 nd FINGER
Swipe 2nd finger several
times over fingerprint
scanner until two
confirmation beeps sound