Add Master; Set Finger; Set Pin Code - Mul-t-lock ENTR User Manual

6.4.1 Add Master User
Setting a Master User requires both fingerprint and PIN code. It is possible to have up
to two Master Users.
Note: At any stage you can press and hold the [ * ] key to move to standby mode.
MASTERNAME
JOHN
Type in [Master name]

6.4.2 Set Finger

Blue LED illuminates
ADD USER
SET FINGER
Press [OK]
Green LED blinking.
SWIPE
2 FINGER
nd
Place finger on scanner, wait
for beep, then swipe finger
down several times over
fingerprint scanner until two
confirmation beeps emitted.

6.4.3 Set PIN Code

ADD USER
SET CODE
Press [OK]
ENTR® User Manual
MASTER #01
JOHN
[OK]
Green LED blinking.
SWIPE
1 ST FINGER
Place finger on scanner, wait
for beep, then swipe finger
down several times over
fingerprint scanner until two
confirmation beeps emitted.
SUCCESS
2 FINGER
nd
Type in [PIN Code], (4 to 10 digits)
ENTER CODE
ENTER CODE
******
4-10 digits
Press [OK]
Matched Codes
SUCCESS
SET CODE
Retype [PIN Code]
RETYPE CODE
******
4-10 digits
Press [OK]
Mismatched Codes
FAILED
INVALID
SUCCESS
1 ST FINGER
29