General Description; General Installation - Halton Capture Jet KVE-WW Operator's Manual

GENERAL DESCRIPTION

Halton's Water Wash technology provides solutions for a variety of commercial food service ventilation applications over
virtually any cooking process. Based on Halton's patented highly efficient Capture Jet solution and advanced mechanical
®
KSA filter technology, the Water Wash feature keeps the plenum virtually grease free. Halton's Automatic Water Wash
features allow for continuous operation without extended shut down for cleaning. The hot water wash down is especially
suited to facilities with cooking operation producing substantial volumes of grease and requires reduced maintenance.
The Water Wash system includes three full length wash manifolds equipped with brass spray nozzles. These manifolds
wash the exhaust plenum area and the KSA grease filters. When the wash cycle is initiated the exhaust fan shall shut off.
The Water Wash system is built into the hood with complete controls and safety features. The hood is complete with a
control panel indicating the total hours of operation, safety alarms, security on, and exhaust fan failure.
The control panel is connected to the electrical control box of the fan via a relay which detects any exhaust fan failures.
To achieve the optimum performance from your hood system (s) please use the following guidelines provided within the
pages of this Installation, Operation and Maintenance Manual.
In addition to this information technical support is available from the Halton Factory during regular office hours, 7 A.M. to
5 P .M. Central Time, to provide support for products, applications, installation, commissioning or for any aspect that you
may have. Our local sales representatives can also provide support.
RECOMMENDATION
Upon receipt of the Halton hood (s), inspect unit (s) immediately for any shipping damage and notify carrier immediately
if damage is found. Halton will not accept responsibility for any shipping damage. All systems are thoroughly inspected
before leaving our factories; however Halton will assist in filing a claim if needed.

GENERAL INSTALLATION

It is the responsibility of the installing contractor to see that the system installation is completed in accordance with
the project plans and specifications and that it meets all specific requirements of local code officials. The local authority
having jurisdiction could over rule some of the installation details written in this manual. The installation shall be in
accordance with NFPA-96. All electrical systems shall be installed following local and national codes.
The owner and/or operator should be instructed in the proper operation, care and maintenance of the system.
If questions or complications should arise during the installation of the Halton hood (s) that cannot be solved using the
instructions provided please contact the Halton office at 1-800-442-5866, or (1-800-4-HALTON).
Note: There are no instructions contained within this manual for installation or maintenance of fan packages.
**See appropriate manufacturers manual for detailed instructions.
2
Capture Jet ® with Water Wash Operation & Maintenance Manual