Table of Contents
Advertisement
HOOD MAINTENANCE
Halton highly recommends that the facility enter into a formal annual maintenance contract with the local Authorized
Service Agent. Contact the factory directly if you would like the name and phone number of the local ASA.
1.
Clean the hood canopy inside and out as needed with mild soap and water. Never use harsh or abrasive cleaners on
Stainless Steel or Painted surfaces, making sure to wipe clean all interior and exterior surfaces of the hood including
the light fixtures.
** Never clean the hood canopy when any of the surfaces are hot.
2. The KSA stainless steel filters need to be cleaned regularly. The frequency of cleaning is load dependent. Filters
can be soaked in a degreaser overnight and rinsed in the morning before being replaced or they can be run through
a commercial dish machine. Please see instructions below that describe the removal of the KSA filter and cleaning
process.
Filter Removal Instructions
Capture Jet
®
with Water Wash Operation & Maintenance Manual
16
Advertisement
Table of Contents
