eXact Micro 20 Instruction Manual page 8

eXact iDip app for eXact
®
send, and share the results directly linked to your customers information and
GPS location to include date/time stamp. The eXact iDip
for use on both Apple and Android devices. The app is compatable with
Bluetooth 4.0 devices (Android 4.3 and up and Apple iOS 6.1 and up) For a
full list of compatible devices please visit sensafe.com/compatible–devices/.
When using your eXact
app. You will need to complete the following steps after you have rinsed and
filled your cell with the water sample and prior to zeroing your meter and dipping
your strip.
HOW TO SELECT A CUSTOMER
From your smartphone/tablet, launch the eXact iDip
app. Select 'Customers' from the home screen. From
the Customers list 'Add customer from contacts' or
create a new contact by selecting the '+' in the upper
right hand corner.
Please Note: When you select a new customer, this customer will not appear in the list until you have run and saved
a test using the app and your eXact
Please note that batch uploading tests saved on your eXact Micro 20 to a smartphone/tablet is not yet available.
If you want to save a test result from your Micro 20 to the app, you will need to run the test while connected to the app
or enter the result manually.
8
Micro 20 with Bluetooth® SMART
®
The benefits of purchasing an eXact Micro 20 with Bluetooth
ability to connect your photometer to a smartphone or tablet and use our specially
designed app to easily save, send, and share your test results. First, select your
test using the menu selections on your Micro 20 then run the test and the results
will simultaniously display on the app and on your Micro
20 with Bluetooth SMART. From the app, you can save,
®
Micro 20 with Bluetooth
®
Micro 20 with Bluetooth
®
Subject to technical modifications without notice, ©2014 Industrial Test Systems, Inc.
app is available
®
SMART and the eXact iDip
®
®
SMART photometer.
®
HOW TO CONNECT VIA BLUETOOTH
Tap the menu slide out screen '
'Bluetooth Test'. Select your eXact
the list located at the bottom of the screen. Verify it
has connected and tap 'OK'.
The serial number is located on the back of your device, this
will display in the app. Refer to the serial number
to ensure you are connected to the correct device.
READ RESULTS
Results will display simultaneously on the
Micro 20 photometer and app.
SMART is the
®
®
' and select
Micro 20 from
®