Configuration; Overview - Paradyne BitStorm 4800 Express Installation Manual

Configuration

Overview

The BitStorm 4800 Express is designed to require minimal configuration before it
can be accessed by a Network Operations Center (NOC). When the
BitStorm 4800 Express is first powered up it is a fully functional bridge, and all
DSL ports are set to their maximum speed.
Initial configuration is performed using the Command Line Interface (CLI). The CLI
is available from a terminal or PC connected to the CONSOLE port, or through the
management port (Port 1).
Additional configuration may be necessary, depending on the mode used to
manage the BitStorm 4800 Express:
This can be performed using the CLI, SNMP, or the web interface.
For more configuration information, see the
4821-A2 Command Line Interface Reference
the web interface).
4821-A2-GN21-10
Inband
Out of band through Port 1
July 2004
BitStorm 4800 Express Model
(for the CLI) and the online Help (for
4
4-1