Installing The Bitstorm 4800 Express Into A Rack - Paradyne BitStorm 4800 Express Installation Manual

1. Installation

Installing the BitStorm 4800 Express Into a Rack

Two types of mounting screws are provided. Use:
Procedure
To install the BitStorm 4800 Express into a rack:
1-8
#10-32 mounting screws for rails with threaded screw holes
#12-24 mounting screws and self-retaining nuts for rails with unthreaded
screw holes
1. Determine where in the rack you will mount the BitStorm 4800 Express. If your
rack does not have threaded screw holes, slip self-retaining nuts onto the rails
where the BitStorm 4800 Express will be fastened.
2. Place the unit so that the brackets rest against the front of the rails. Insert
screws in the bottom screw positions and hand-tighten them.
July 2004
02-17070
4821-A2-GN21-10