Table of Contents
Advertisement
PULSE FEATURE
The Pulse (Heart Rate) Window will display your current heart rate in beats per minute during the workout.
You must use both stainless steel sensors on the front cross bar to display your pulse or wear the wireless
chest strap. The pulse value will display anytime the upper display is receiving a pulse signal.
TURNING OFF TREADMILL
1.
The display will automatically turn off – go to sleep – after 30 minutes of inactivity when in the Pause /
Stop mode.Almost all power for the treadmill will be off except for some circuits that are needed to
detect if any key is pressed, indicating the console should "wake up". When the console is "asleep" the
treadmill draws very little power, about as much as your television when it is turned off.
2.
Removing the safety key is similar to entering "sleep" mode. Turning off the main power switch in the
front of the treadmill will completely remove any power.
**ATTENTION**
Your new console comes configured in an in-store 'Display Mode' of operation, where the console will
remain powered on unless the main power switch is turned off. To exit the display mode, for normal
operation, press and hold the Stop, Enter and Display keys for 5 seconds; the display will show: Display
mode - On. Use any of the Program, Incline or
Enter.
/
Speed
keys to change the setting to Off then press
-14-
Hide quick links:
Advertisement
Table of Contents
