Transportation On The Roof Rack - Skoda Citigo Owner's Manual

Fig. 83 Variable loading floor: lower / lowered

Read and observe and
›
To raise the loading floor, grasp handle
direction of arrow » Fig. 82.
1
›
To lower it, lift the loading floor, push it into the grooves in the direction of
arrow insert and lay it on the luggage compartment floor in direction of
2
arrow .
3
Class N1 vehicles

Read and observe and
In class N1 vehicles that are not fitted with a protective grille, a lashing set that
complies with the EN 12195 standard (1-4) must be used for fastening the load.
For safe vehicle operation, the proper functioning of the electrical installation
is essential. It is important to ensure that it is not damaged in adaptation as
well as the loading and unloading of the cargo space.
70
Using the system
on page 68 first.
and raise as far as the stop in the
A
on page 68 first.

Transportation on the roof rack

Fig. 84 Attachment points - 3-door
Fig. 85 Attachment points - 5-door
The attachment points and
A B
» Fig. 84 and » Fig. 85.
The basic carrier should be mounted and dismounted in accordance with the
instructions provided.
Roof load
The maximum permitted weight of the load incl. carriers is 50 kg.
WARNING
The following instructions must be observed to aid road safety when trans-
porting cargo on the roof rack.
Always distribute the load on the roof rack evenly and secure properly
■
with suitable lashing straps or tensioning straps.
are located on both sides of the vehicle
