›
Remove the wiper blade in the direction of the arrow
Attaching the windscreen wiper blade
›
Slide the windscreen wiper blade in the opposite direction to arrow
locks into place. Check that the windscreen wiper blade is correctly attached.
›
Fold the windscreen wiper arm back to the windscreen.
144
Do-it-yourself
.
3
Fuses and light bulbs
Fuses
until it
3
This chapter contains information on the following subjects:
Individual electrical circuits are protected by fuses. A blown fuse is recognisa-
ble from the melted-through metal strip
WARNING
CAUTION
Replace the faulty fuse with a new one of the same amperage.
■
If a newly inserted fuse again blows after a short time, then seek assistance
■
from a specialist garage.
"Do not repair" the fuses and do not replace them with stronger fuses - dan-
■
ger of fire and damage to another electrical system.
Introduction
» page
120.
Fig. 164
Blown fuse
» Fig.
164.
145
145
146
146
147
147