Instruments and warning lights
Instrument cluster
Introduction
Fig. 16 Instrument cluster - Version 1/Variant 2
This chapter contains information on the following subjects:
Rev counter
Fuel gauge- Petrol
Fuel gauge - petrol / natural gas
Speedometer
1
Display
» page 37
2
Button:
3
▶
Switch between the counter for the distance driven (trip) and the odom-
eter
» page 38
▶
Reset counter for distance travelled (trip)
30
Using the system
Fig. 17
Instrument cluster - Variant 3
» page 38
▶
Set the time
» page 37
▶
switch between the outside temperature and time display (only in the
instrument cluster - Variant 3)
Fuel gauge
» page 31
4
Engine revolutions counter
5
Time adjust button
» page 37
6
The instruments are also illuminated when the side light or low beam light is
switched on.
Note
Appears in the display then the system indicates that the ignition is
switched on.
Rev counter
The tachometer
» Fig. 17
5
nute.
The beginning of the red scale range of the tachometer indicates the maxi-
mum permitted engine speed of a driven-in and operating warm engine.
You should shift into the next highest gear before the red scale of the revolu-
tion counter is reached, or select mode D on the automatic gearbox.
The gear recommendation is important to note in order to maintain the opti-
mum engine speed
» page
CAUTION
The rev counter pointer may only move into the red area for a short time - oth-
erwise risk of engine damage!
30
31
31
» page 37
» page 30
on page 30 shows the actual engine speed per mi-
38.