Carel easy way aria User Manual page 16

GB
MODE /ON-OFF button (1)
The button is used to:
• CHANGE THE DESIRED OPERATING MODE, CYCLICALLY.
• SWITCH THE UNIT ON/OFF
The operating mode can be read/written from the supervisor.
par. description
Activate operating mode:
- 0 AUTO 2
1 AUTO+RES 3
MODE AUTO
loc 17 = 0
Heater
par. description
Heater status
0/OFF not fi tted
loc 16
1/ON fi tted
The parameter is used to enable/disable the use of the heater for AUTO
and HEAT modes.
The terminal does not control the status of the heater, but rather tells the
supervisor whether it is enabled for the assigned modes.
Skip mode
Parameter loc17 can be used to disable the management of some
modes.
Note: the following examples are without the heater (loc 16 =
OFF).
Hereinafter in the manual, the symbols
simplicity, + and
par. description
Modes allowed with MODE button
0 complete functions
1 manual only
2 manual only limited to cooling heating auto
loc 17
3 manual only limited to cooling (sun) heating (snow)
4 manual only limited to cooling (sun)
5 manual only limited to heating
6 Sleep timer setting
easy way ARIA +030220841 - rel. 1.0 - 26.10.2007
COOL 4 FAN 6
DRY 5 HEAT
AUTO + RES HEAT
+
and will also cover, for
+ .
MODE
Each operating modes is associated with a symbol on the display.
min max
HEAT+RES 0 6
HEAT + RES
+
min max
OFF ON
min max
0 6
16
Fig. 4.c.a
def um type index R/W
0 I 5
COOL FAN
def UOM type index R/W
0 - D 14
def UOM type index
0 - I 17
notes
R/W -
DRY
Tab. 4.b
notes
password
R/W
access
R/W notes
password
R/W
access