Table of Contents
Advertisement
GB
4.5 Setting the parameters
The terminal features a series of internal parameters to customise the
device according to the type of use.
The parameters are divided into two categories:
•
User – parameters modifi able by the user without entering the
password
•
Factory – parameters modifi able only after having entered the
password
Key:
Pressing the buttons together for 3 s accesses the
+
parameters menu
Multifunction
Set and confi rm changes
UP
Increase parameter value/index
DOWN
Decrease parameter value/index
Editing the user parameters
easy way ARIA +030220841 - rel. 1.0 - 26.10.2007
Access
To access parameter programming mode
•
pressing buttons 3 (FRESH AIR) and 6 (DOWN) together for 5 seconds
The display will show:
•
in the secondary fi eld, the index of the parameter (loc n), where n is
the index.
•
in the main fi eld, the value of the parameter and its unit of measure,
°C/°F or %rH
Tab. 4.t
To exit parameter programming mode:
•
By time, 30 sec after the last button was pressed
•
manually by pressing the button
Fig. 4.f.b
28
Fig. 4.f.a
Advertisement
Table of Contents
