Key Number Assignments - Nortel 2033 Installation And Operation Manual

Key number assignments

You can also press the 5 key to select the Lock Now item from the Lock
Menu. The Lock Now item immediately exits the Local Tools menu, closes
any open Local Tools menu pages, and locks the Local Tools menu.
Alternatively, when time expires, the Local Tools menu and any open
submenus are closed. Double-press the Services key to open the password
prompt window to reaccess the Local Tools menu.
If you enter an incorrect password, the Local Tools menu will not open.
Double-press the Services key to open the password prompt window. Only
three incorrect password entries are allowed. Any entry after the three
attempts is ignored for 5 minutes. The password prompt window is visible
and you can reenter the password but the password is not processed until the
5 minute time expires.
Note: Some text appears dimmed depending on the current state of the
menu lock and the configuration of the IP Phone. Only configuration
options which are enabled from the current state appear active. Menu
options that are not available appear dimmed.
For more information about configuring the Local Tools menu for the
IP Phone 1140E, refer to Appendix F "Configuring the Local Tools menu" on
page 551.
A maximum of nine functions can be assigned to the four soft-labeled,
pre-defined soft keys. Because they are pre-defined, the user cannot change
the key number assignment. Functions are assigned to the soft keys in layers
in LD 11.
The Message key is numbered 16. Key numbers 17 to 31 are the four soft-key
labels below the display area. See Figure 53 on
Key numbers 17 to 31 support the features A03, A06, CFW, CHG, CPN,
PRK, PRS, RGA, RNP, SCC, SCU, SSC, SSU, and TRN. See Appendix I "IP
Phone context-sensitive soft keys" on
features.
Nortel IP Phone 1140E
page 587
IP Phones Description, Installation, and Operation
Page 377 of 600
page 373.
for a description of these