Nortel 2033 Installation And Operation Manual page 103

DHCP (0-No, 1-Yes)
VLANFILTER (0-No, 1-Yes)
PC Port? (1-On, 0-Off)
Data VLAN? (0-No, 1-Yes)
Data VLAN Cfg? (0-A, 1-M)
Data VLAN ID:
Duplex? (0-Auto, 1-Full)
Nortel IP Phone 2002
If you select 1-Y (1 for Yes), the VLAN
ID is configured automatically to a
value received from the DHCP
server.
You are not prompted for DHCP if
VLAN is not set to Auto (2-Au), or if
DHCP is not enabled.
Default 0 (for No)
You are not prompted for
VLANFILTER if VLAN is not enabled.
Default 1 (for On).
Select 0 (for Off) to disable the PC
port.
If you select 1-Y (1 for Yes), and if
LLDP is enabled, the Data VLAN Cfg
prompt appears on the display.
This prompt is not displayed if the PC
port prompt is set to OFF.
If you select 0 (0 for A), VLAN ID is
configured automatically to the value
received in the VLAN NAME TLV.
This prompt is not displayed if Data
VLAN, or LLDP is not enabled.
This prompt is displayed if Data
VLAN is enabled but LLDP is not
enabled.
Default 0 (for Auto)
IP Phones Description, Installation, and Operation
Page 103 of 600