Auriol IAN 270302 Operation And Safety Notes page 18

5. Press the CLOCK button to confirm your
settings. The time zone display flashes.
6. Press the SET / RESET button to set the
desired time zone for time zone 2 (–12
hours to +12 hours).
Note: Should you be in a country in
which the DCF signal can be received but
the time is different to your current local
time, you can use the time zone setting to
have the clock display your current local
time. If you find yourself in a country in
which, for example, the local time is an
hour ahead of Central European Time
(CET), you set the time zone to +01. The
clock is now still controlled by DCF but
shows the time as one hour ahead of
CET. If you wish to know what the time is
in the USA for example, then simply by
setting the time zone value to e.g. –10
you will obtain the current local time in
Los Angeles etc.
7. Press the CLOCK button to confirm your
settings. The hour display flashes.
8. Press the SET / RESET button to set the
desired value.
9. Press the CLOCK button to confirm your
settings.
10. Repeat steps 6 and 7 to set the values for,
minutes, seconds
(day / month).
Note: The seconds display can only be
reset to 00.
18 GB
, year and date
10 13