Paradyne COMSPHERE 3910 Installation And Operation Manual page 56

3900 series point-to-point/multipoint modems
Hide thumbs Also See for COMSPHERE 3910:
Table of Contents

Advertisement

COMSPHERE 3900 Series Modems
To access Backup from the Status branch, make the following selection:
Press the
Select Backup.
The configuration of the current operating line facility (either APL primary or backup) appears
(Refer to Table 3-7).
Press the
This screen displays the configuration and condition of the inactive line facility (either APL
primary or backup).
There are four condition codes, Good, Bad, ????, and ' ' (blank).
Table 3-7 provides information about the Status Backup screens. The first column lists all possible
configurations for the modem's currently active line. The second column lists all possible
configurations for the modem's inactive lines. The third column provides information about the
inactive line condition.
XXXX represents the condition code of the inactive line.
3-22
key until Backup appears.
Status:
DTE
Backup
F1
F2
F3
Status:Backup
>
Line=Pri 4w APL
F1
F2
F3
key to display the next screen.
Status:Backup
<
Bkup:2wAPL=Good
F1
F2
F3
November 1996
3910-A2-GN32-30

Advertisement

Table of Contents
loading

This manual is also suitable for:

Comsphere 3911

Table of Contents