Paradyne COMSPHERE 3910 Installation And Operation Manual page 101

For Trellis Multipoint (TMp) modems (control or tributary), you must specify the remote access
password of the modem that will be accessed by the Remote function. The following display does
not appear in point-to-point modems.
The password field (yyyyyyyy) displays the remote access password of the modem to be accessed
by the Remote function.
To increment digits within the password field (yyyyyyyy), use the
cursor ( _ ) under the digit that will be incremented. Press the F2 ( ) key to increment the digit.
Press Enter (Ent) to select the modem that will be accessed by the Remote function.
or
If operation over the secondary channel is desired, press any function key to select the secondary
channel. Secondary channel only appears if using V.32 terbo, V.32bis, V.32 or TMp
modulation. If operation over the primary channel is desired, press the
displays and press any function key. Primary channel operation is not available when initiating
a Remote function from a TMp tributary modem.
If the remote modem accepts the password and the entry is successful, the Top-Level menu of the
remote modem appears on the local modem's LCD. An
indicating that what is displayed on your LCD is actually the Top-Level menu of the remote 391x
Series modem. If the message Remote FP Busy appears, the remote modem's front panel is
already in Remote mode.
3910-A2-GN32-30
Choose Password:
Ent yyyyyyyy
F1 F2 F3
Select Channel >
Secondary
F1 F2 F3
Select Channel <
Prim (data blckd)
F1 F2 F3
Online:14.4
Control ExitRem
F3
F1 F2
November 1996
DCP Operation
and keys to position the
key until primary
appears in the upper right-hand corner
3-67