Dcp Configuration Process - Paradyne COMSPHERE 3910 Installation And Operation Manual

COMSPHERE 3900 Series Modems
Figures 4-1 and 4-2 graphically display the interaction between the edit area and configuration
areas as viewed from the perspective of the DCP and the AT command set.
Active (Operating)
4-2
If you are using AT commands, a period of time can exist in which
the contents of Active (Operating) and Active (Saved) differ. Once
you issue an AT&W0 (write) command, however, the two storage
areas are identical.
CONTENTS OF Active (Saved) ARE AUTOMATICALLY COPIED
TO Active (Operating) WHEN A SAVE IS COMMANDED VIA THE
DCP, ON A RESET, OR ON POWER-UP.
Active (Saved) Customer1
Load Edit
Area From
EDIT AREA
ALLOWS YOU TO VIEW AND
EDIT CONFIGURATION OPTIONS
Save
ANY CHANGES MADE TO
To
CONFIGURATION OPTIONS
ARE SAVED TO Active (Saved),
Customer1, OR Customer2
Figure 4-1. DCP Configuration Process
November 1996
NOTE
Customer2 Factory
Sync Leased
(Answer/Originate)
Async Leased
(Answer/Originate)
TMp (Control/Trib)
Async Dial
Sync Dial
UNIX Dial
3910-A2-GN32-30