If there are modems in the poll list when you select Display,
xxx
yyyyyy
Select Nxt to scroll through the entries in the Active or Skip poll lists.
To exit this function and remain in the PList Display branch, press the
to the Top-Level menu, press the
Clear
The Clear function does not appear in Remote mode.
Clear deletes the modem's poll list.
To access Clear from the PList branch, make the following selection:
Select Clear.
The message Command Complete appears on the second line of the LCD to indicate that the poll
list has been cleared.
To exit this function and remain in the PList branch, press the
Top-Level menu, press the
Change
The Change function does not appear in Remote.
Change allows you to change the modem's poll list.
To access Change from the PList branch, make the following selections:
Press the
Change allows you to add modems to the Active poll list (Active), delete modems from both
Active and Skip poll lists (Delete), and move modems from the Active to the Skip poll list.
3910-A2-GN32-30
Displays the network management address of the modem in the poll list.
Displays either Active or Skip to indicate the poll list in which the network
management address is included.
key.
Poll List:
>
Display
Clear
F1
F2
F3
key.
Poll List:
Clear
Change
F3
F1
F2
key until Change appears. Select Change.
November 1996
DCP Operation
key. To exit and return
key. To exit and return to the
3-27