Paradyne COMSPHERE 3830 User Manual page 79

S65 Line Current Disconnect
Determines if the modem disconnects if an interruption in loop current
greater than 8 milliseconds or 90 milliseconds occurs.
Register has the following values:
0 = Enable (8 msec)
1 = Enable (90 msec)
2 = Disable
Factory setting is Enable (8msec).
S66 NMS Call Messages
Register determines if the modem sends information regarding status
(Call Progress) and/or sends summarized call statistics (Call Connect) to
the network management system (COMSPHERE 6700 Series NMS).
Register has the following values:
0 = Call Connect & Progress
1 = Disable
2 = Call Connect Only
3 = Call Progress Only
Factory setting is Call Connect & Progress.
S67 Directory Location 1 Callback
Determines if the modem uses the single number callback function.
Register has the following values:
0 = Disable
1 = Enable
Factory setting is Disable.
3830-A2-GB91-30
Table 4-3
(14 of 20)
Model 3830 S-Registers
August 1998
4. AT Command Set and S-Registers
4-43