Paradyne COMSPHERE 3830 User Manual page 36

COMSPHERE 3800 Series Modems – Model 3830
You must have configured your modem according to the
specifications of your fax software manual. For example:
– Some fax software requires that the modem have
– Some fax software requires that the modem use software
– DTR Action should be set for standard EIA-232-D operation.
– LSD (Line Signal Detect) Control should be set for standard
– Data should be buffered during Error Control (EC)
If your fax software requires that you change the configuration of your
modem, see the appropriate sections of Chapter 4,
S-Registers.
Your fax software uses AT commands to tell the modem what to do.
You do not have to issue AT commands yourself, unless you use AT
commands to configure the modem.
For more information about fax operation, see the manual that came
with your fax software.
3-2
Auto-Answer disabled. You can set this with the ATS0=0
command.
flow control. You can set this with the AT\Q1 command.
Use the AT&D2 command.
EIA-232-D operation. Use the AT&C1 command.
negotiation. Use the AT/C1 command.
August 1998
AT Commands and
3830-A2-GB91-30