Paradyne COMSPHERE 3830 User Manual page 61

\K n
Buffer Control, Send Break Control, Break Forces Escape
The \K n command sets three configuration options simultaneously:
\K0
\K1
\K2
\K3
\K4
\K5
\K6
BREAK BUFFER CONTROL
Determines if data stored in the modem's buffer is saved or discarded
when the DTE issues a break sequence.
SEND BREAK CONTROL
Determines what is sent from the modem first, data or break if a break
sequence is sent from the DTE.
BREAK FORCES ESCAPE
Determines whether or not the modem should enter Command mode
when it receives a break character from the DTE.
3830-A2-GB91-30
Table 4-2
(19 of 23)
Model 3830 AT Commands
Break Send
Buffer Break
Control Control
Discard Data Break First
Discard Data Break First
Keep Data Break First
Keep Data Break First
Keep Data Data First
Keep Data Data First
Discard Break Not Applic.
August 1998
4. AT Command Set and S-Registers
Break
Forces
Escape
Enable
Disable
Enable
Disable
Enable
Disable
Disable
4-25