Table of Contents
Advertisement
and repeat the steps with any other month. When finished, press
connect and download the information. The ARE YOU SURE icon will appear.
Press
again to download the information. The UPDATE SUCCESSFUL
message appears confirming that the controller accepted the new information
and then, Setup Menu appears again.
4.5 Reports menu
The Controller Report menu allows the user to review a controller's program
status including changes made to the program, budget, events off, rain off or
month off. The handset that made the changes can also be identified. In
Current Status the user can review any active features such as time, date, or
active manual runs. Current Status also notifies the user if there is a short or
open circuit in valve wiring, the power level in the controller and the external
temperature around the controller. In History Reports the user can review the
time each valve has been open for the current and last month. To review
Reports press
to 3 reports.
1. Program Status
In the controller menu screen, press
to enter the REPORT MENU screen. In the REPORT MENU screen, press
and highlight the PROGRAM STATUS icon.
Press
to enter the PROGRAM STATUS screen. The handset will connect to
the controller. After connection is established, the PROGRAM STATUS screen
appears with the first program change. Then the VIEW CHANGES screen
appears. Press
changes and the handset that made the modifications. Repeat the same steps
to view other changes. When finished the Program Status menu appears again.
10:00
10:00
CONTROLLER MENU
to navigate to REPORTS. Press
to view the changes. The next few screens will show the
10:00
REPORTS
REPORT MENU
to enter and review up
and highlight the REPORT icon. Press
10:00
PROGRAM STATUS
24
to
10:00
UPLOADING
CONNECT
Advertisement
Table of Contents
