Table of Contents
Advertisement
needed. Press
b. Setting Current Time and Date
The hour digit appears (digits flashing). To set the current hour press
. Press
and the minute digit appears flashing. To set the minute digit,
press
or
. Press
the day of the week press
the year. Press
10:00
10:00
SETUP
2. About the Handset and Controller Communication Method
In order to establish 2-way communication between the LEIT RC2 handset and
the LEIT-2 controllers, a simple setup process using HANDSET SETUP and
CONTROLLER SETUP must be completed.
Handset and Controller ID are used as an individual address to identify the
handset and controller if more then one handset or controllers are used on a
system (the permissible ID is 0-99.) The ID should be assigned to each handset
first, and after connecting to a controller for the first time, set the ID for the
controller.
Client ID enables the user to have unique identity codes for their handsets
and field controllers. This is a security feature that locks out unauthorized
users (the permissible ID is any letter combination that follows this format:
AAA-ZZZ). In addition, after connection to the controller, a descriptive
controller address can be assigned to the controller with up to 14 characters
to uniquely identify the location of each LEIT-2 controller on the system.
3. Setting the Handset ID and Client ID
First, set the Handset ID. Start by pressing
press
to navigate down to the HANDSET SETUP. Press
to continue and to set the time and date.
and the day of the week appears flashing. To set
or
to continue.
10:00
SETUP MENU
SET TIME / DATE
. Repeat the steps to set the month and
10:00
12-HOUR
MM/DD/YYYY
SET TIME / DATE
to enter the menu, and then
10
or
10:00
10:00:00 AM
MONDAY
7/10/2006
SET TIME / DATE
to enter
Advertisement
Table of Contents
