Table of Contents
Advertisement
MANUAL TEST icon. Press
a screen will display that a program is running. In order to use the manual test
feature, the program(s) that is running needs to be suspended. After the
program is suspended, the manual test screen will appear with the valve
number and the words TURN ON flashing. Press
screen confirming that the valve is turned on appears.
To turn off Valve #1 press
Valve #2 or to exit. Repeat the steps for each valve as needed.
If the valve is not turned off, it will turn off automatically after 3 minutes.
10:00
10:00
MANUAL RUN
MANUAL RUN MENU
2. Manual Temp
In the CONTROLLER MENU screen press
icon. Press
to enter the MANUAL RUN menu screen. Press
highlight the MANUAL TEMP icon. Press
active, a screen will display that a program is running. In order to use manual
temp the programs that are running need to be suspended. After the program
is suspended, the manual temp screen will appear with the valve number and
the hour digits flashing.
Press
or
digits. Repeat the steps for Valve #2. Press
SURE screen appears. Press
finished select the exit icon by pressing
10:00
10:00
MANUAL RUN
MANUAL RUN MENU
to connect. If the controller is active,
. After turning Valve #1 off, press
10:00
MANUAL TEST
and set the hour digits, then press
again to initiate a temporary program. When
10:00
MANUAL TEMP
to turn on Valve #1 and a
10:00
UPLOADING
CONNECT
and highlight MANUAL RUN
to connect. If the controller is
to connect. The ARE YOU
or
. Press
10:00
UPLOADING
CONNECT
16
to skip to
10:00
CONNECTED
CONNECT
to
and set the minute
to exit.
10:00
CONNECTED
CONNECT
Advertisement
Table of Contents
