Table of Contents
Advertisement
3. Global Stop – Stops Irrigation of all LEIT-2 Controllers Within Range
of the RC2 Handset
In the controller menu screen press
Press
and enter MANUAL RUN menu screen. Press
GLOBAL STOP icon. Press
controller is in range the signal may take a few seconds. Within the handset
range, all the LEIT-2 controllers with the same Client ID will stop for 1 day. The
controller menu will appear on the handset.
10:00
10:00
MANUAL RUN MENU
4.2 Setting or Changing a Program
This feature allows the user to review, change or set a schedule with up to
two separate programs for each station. Each valve can be programmed with
odd, even, and up to every 30 days. Each program has up to 4 individual start
times per day with durations up to 5 hours and 59 minutes in 1-minute
increments for each valve. At the end of the setting the handset also displays
the next time a program will operate.
Press
and navigate to the PROGRAM A icon. Press
PROGRAM A. Use the same procedures to make any adjustments, as needed.
Repeat the steps for PROGRAM B as needed or exit the Program Menu.
In the controller menu screen press
Press
to enter the PROGRAM MENU screen. Press
PROGRAM A icon. Press
communication, CONNECTED will appear momentarily and then the
PROGRAM A, SELECT DAYS screen appears with SELECT DAYS flashing. In
each program the following options are available:
to connect. If more than one
10:00
GLOBAL STOP
GLOBAL STOP
to connect. After establishing
to highlight the MANUAL RUN icon.
10:00
ARE YOU SURE?
STOP FOR
XX DAYS
YES / NO
and highlight the PROGRAM icon.
17
and highlight the
10:00
CONNECTING
CONNECT
to enter
and highlight the
Advertisement
Table of Contents
