Table of Contents
Advertisement
momentarily and then, CONNECTED TO: CONTROLLER ID: 00, DEFAULT SETUP.
Press
again. The UPLOADING screen appears momentarily then, CONT.
SETUP with CONTROL ID: XX (digits flashing), which means the controller's ID
is available for modification.
To modify the controller ID, press
first digit. Press
continue to the next step, setting controller address (the default is NO-
DESCRIPTION). Repeat the steps for entering a controller address. The final
step is selecting a new Client ID (A-Z) (this is a security feature). The default
ID is AAA. Repeat the steps to select a new ID. When finished, press
connect and upload the new information. The ARE YOU SURE? screen will
appear. Press
SUCCESSFUL message will appear momentarily confirming that controller
setup is updated and complete and then, the controller menu appears.
The controller is ready to program:
NOTE: Client ID on the controller must be the same as the handset.
10:00
10:00
MAIN MENU
10:00
10:00
CONNECTED
CONNECT
10:00
10:00
CONNECTING
CONNECT
and repeat the steps with the second digit. Press
again to download the information. The UPDATE
10:00
CONTROL ID: XX
NO DESCRIPTION
RADIO UPLINK
RADIO UPLINK
10:00
<
>
CONTROL ID: XX
NO DESCRIPTION
CONNECTED TO
10:00
UPDATE
SUCCESSFUL
CONNECT
CONTROLLER MENU
or
and enter a number (1-9) for the
10:00
ARE YOU SURE?
YES / NO
10:00
UPLOADING
CONTROL ID: XX
NO DESCRIPTION
CLIENT ID: XXX
CONNECT
CONT. SETUP
14
to
to
10:00
CONNECTING
CONNECT
10:00
ARE YOU SURE?
YES / NO
Advertisement
Table of Contents
