Review The Controller History Reports - DIG LEIT Link Instruction Manual

This screen appears if there is a short in the wiring. Press
to continue.
This screen appears with time and the date of the
controller. Press to continue.
This screen appears when the sensor allows watering.
Press to continue.
This screen appears if no sensor is used. Press
continue.
Press to repeat. Press or to move to the next feature.

REVIEW THE CONTROLLER HISTORY REPORTS

This feature allows you to review the controller History Reports for total watering time for each
valve with overall total and manual run total. This information is available for the current month and
the previous 11 months. Also available on the report is the total usage and overall usage per valve
for the current and previous year.
To review History Report press . To skip History Report
and move to the next feature, press or
After selecting Controller ID, the handset will establish a
link with a LEIT controller that has this same identity
address. While the word Connect is blinking, wait for a
confirmation. After communication is established, the
following information screens would provide you with a
history report on the controller. If communication is not established the No Response-Try Again
screen will appear with Yes highlighted as the default. Press
with a LEIT controller that has the same ID.
This screen shows total time usage for each valve this
month. Press to continue.
This screen shows total time usage for the current month.
Press to continue.
This screen shows total manual usage for the current
month. Press to continue.
Station xx S/C
Wiring Fault
FRI 1/26/05
01:37 PM
Sensor allows
Watering
to
Sensor is
Unused
UPLINK
to continue.
HISTORY?
Connect ID: 12
Controller:
again to initiate communication
Valve01 Use This
Month: 2:34
JAN06 TOTAL This
Month: 12:34
JAN06 MAN This
Month: 0:30
11
These screens review information on specific month. To review this information, select Yes for the
selected month or No to skip to the next month. Press
OK press to select. Press
OK
If a specific month was selected in the previous screen, the
handset will try to establish a link with the LEIT controller
with the same Controller ID to retrieve this information.
While the word Connect is blinking, wait for a confirmation.
OK
After communication is established, the following screens
will provide you the information on the specific month you selected. If communication is not
established the No Response-Try Again screen will appear with Yes highlighted as the default. Press
again to re-initiate communication with a LEIT controller that has the same ID.
OK
These example screens provide the monthly watering totals as requested in the previous step. This
information is available by month for the previous 11 months. Press
To review a total usage report for each year, select Yes for
the selected year or No to skip to the last year. Press
and underscore Yes or No, then press
Press or
continue.
OK
These two screens show current year usage for a valve and for all the valves. Press
continue.
To review information on total usage for last year, select
OK
Yes for the selected year or No to exit. Press
underscore Yes or No, then press
or again to underscore OK. Press
continue.
These two screens show last year usage for a valve and for all the valves. Press
OK
OK
Press to repeat. Press
or
or again to underscore OK. Press
DEC05 Tot/Valve?
0Yes 0No OK
Valve1 Use NOV
Month: 9.55 OK
or
to select.
again to underscore OK. Press to
Valve01 Use This
OK
YR:06: 1682:34
or and
to select. Press
to
Valve01 Use last
YR:05: 1040:66 OK
or to move to the next feature.
12
and underscore Yes or No, then
to continue.
NOV05 Tot/Valve?
OK
0Yes 0No
Connect ID: 12
Controller: OK
to continue.
NOV05 TOTAL This
Month: 22:34 OK
OCT 05 MAN This
Month: 2:30 OK
YR:06 TOT/Valve?
0Yes 0No OK
to
Total Use This
Yr:06: 9010:86 OK
YR:05 TOT/Valve?
0Yes 0No OK
to continue.
Total Use Last
YR:05: 3010:86 OK