Table of Contents
Advertisement
The user can now easily connect to this controller using the newly assigned
Controller ID and Client ID. Repeat the steps to program additional
controllers.
Attention: The two (2) yellow or yellow and black sensor wires are left
connected, so the RAIN OFF alert will not appear. If a rain sensor needs to be
added, see Sensor Installation in the LEIT-2ET controller instruction manual.
Controller Menu
4.
After establishing communication with a LEIT-2 controller,
continue by pressing
ID and status are displayed until the controller menu
appears. In the Controller Menu any of the LEIT-2 features can
be reviewed or modified.
4.1 Manual Run
The first option available on the controller menu is to perform a remote
Manual Run, if needed. Other options are available at this time, such as the
Global Off command, which turns off all controllers with the same ID within
operating distance of the handset.
Manual Run is useful for checking the proper operation of stations (especially
after installation), for applying additional water for a defined irrigation period,
or repeat testing of any individual valve using manual test icon.
The Manual Run feature can be used to test a selected valve, make a
temporary program or skip any valve as needed. Manual run has a priority over
a program and will suspend a program or valve-watering schedule. Note that
at the completion of Manual Run, any programmed irrigation schedule reverts
back to normal operation.
Press
and navigate to the MANUAL RUN icon. Press
MANUAL RUN menu screen. Use the same procedures to select other options
as needed.
1. Manual Test
In the controller menu screen press
Press
to enter the MANUAL RUN menu screen. Press
. Screens displaying the controller's
and highlight the MANUAL RUN icon.
15
10:00
CONTROLLER MENU
to enter
and highlight
Advertisement
Table of Contents
