Pattern Setup
PATTERN SETUP
------------------------
PATTERN NO.
1
UNDEFINED
CLR PATTERN
CANCEL
RUN PATTERN
<EDIT PATTERN>
BACK
EXIT
Edit Pattern
EDIT PATTERN 1
------------------------
MOVE TO START POSITION
[NEAR:START /FAR:CANCEL]
EDIT PATTERN 1
[NEAR:SAVE
/FAR:DELETE]
Speed Dome Camera Instruction Manual
Pattern Number
Clear Pattern
Run Pattern
Edit Pattern
①
Using Joystick, move to start position with appropriate zoom. To
start pattern recording, press NEAR key. To exit this menu, press
FAR key.
② Move camera with controller joystick or run preset function to
memorize a path (often a curved path) in a selected pattern. The
total memory size and remaining memory size are displayed in
the form of a bar. Maximum 1200 communication commands can
be stored in a pattern.
③
To save data and exit, press NEAR key. To cancel recording and
0/0/x1/N
delete record data, press FAR key.
HOW TO USE OSD MENU
[1~4 ]
Selects Pattern number to edit.
If a selected
"UNDEFINED"
selected pattern number.
[CANCEL/OK]
Deletes data in current pattern
Runs Pattern for the test purposes to check if
it works properly.
Starts editing pattern.
4
pattern number is not defined,
will
be
displayed
under
34