Motion Setup - CBC PT112N User Manual

Motion Setup

MOTION SETUP
------------------------
MOTION LOCK
PWR UP ACTION
AUTO FLIP
JOG MAX SPEED
JOG DIRECTION
FRZ IN PRESET
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
Speed Dome Camera Instruction Manual
Setup the general functions of Pan/Tilt motions.
OFF
Motion Lock
ON
ON
120/SEC
INVERSE
OFF
Power Up Action
Auto Flip
Jog Max Speed
Jog Direction
Freeze in Preset
HOW TO USE OSD MENU
[ON/OFF]
If Motion Lock is set to ON, it is impossible to
set up and delete Preset, Swing, Pattern and
Group. It is only possible to run these
functions. To set up and delete these
functions, enter into OSD menu.
[ON/OFF]
Refer to "Other Functions" section.
[ON/OFF]
Refer to "Other Functions" section.
[1°/sec ~360°/sec]
Sets maximum jog speed. Jog speed is
inversely proportional to zoom magnification.
As zoom magnification goes up, pan/tilt
speed goes down.
[INVERSE/NORMAL]
If you set this to 'Inverse', the view on the
screen will move in the same direction as jog
tilt. If 'Normal' is selected, the view on the
screen will move in the opposite direction.
[ON/OFF]
At start point of preset movement, camera will
freeze the image of start point. Camera keeps
displaying the image of start point during
preset movement and does not display the
images received during preset movement. As
soon as camera stops at preset end point,
camera will display live images received at
the preset end point.
Availability of this function will vary by
model.
4
30