Cabling - CBC PT112N User Manual

Cabling

Controller/ DVR
Moinitor
Power Connection
Please check the voltage and current capacity of rated power carefully. Rated power is indicated on the
back of main unit.
Rated Power
AC 24V (PT112N)
AC 24V (PT112N-XT)
DC power loss increases over distance. DC power wiring to cameras should be kept as short as possible.
RS-485 Communication
For PTZ control, connect the RS-485 line to keyboard and DVR. To control multiple cameras on the same line
with simultaneous operation (see page 13 for resistor settings): the RS-485 communication lines to cameras
are connected in parallel as shown below.
Speed Dome Camera Instruction Manual
Power
PWR(+)
PWR(-)
F.G
RS-485(+)
RS-485(-)
VIDEO(+)
VIDEO(-)
BNC
Cabling Terminal Block
Input Voltage Range
AC 17V ~ 29V
AC 17V ~ 29V
INSTALLATION
IN COM+
IN1
IN2
IN3
IN4
Current Consumption
0.4 A
1.5 A
2
IrDA
Sensor
Door
Switch
Sensor
14