Table of Contents
Advertisement
Motion Detection setting
The motion detection detects the moving objects in the
scene by monitoring changes in brightness level. You
can select the level of sensitivity for motion detection
to 4 zone.
1.
Select [MOTION DET] option on the [CAMERA
SET] menu.
.
Use [N] or [F] button to select a [ON] and press
[M]. The MOTION DETECTION menu appears.
.
Use [N] or [F] button to select a zone number
(ZONE1 ~ ZONE4) on the [ZONE NUMBER]
option.
4.
Use [N] or [F] button to set up the ON or OFF on
the [ZONE STATE] option. If you set to ON, the
zone frame appears on the center of the monitor.
5.
Use [T] or [W] to select an option then use [N] or
[F] button to adjust the option
•
WIDTH: Enlarge or decrease the horizontal
size of the zone frame.
•
HEIGHT: Enlarge or decrease the vertical size
of the zone frame.
•
MOVE X: Moves horizontal position of the
zone frame.
•
MOVE Y: Moves vertical position of the zone
frame.
6.
Use [SENSITIVITY] option to obtain the optimum
detection level.
7.
Select the motion zoom level. If you set the motion
zoom, the camera is activated according to the
selected motion zoom level and after some time
passes, it returns to the previous zoom level when
the motion is detected.
9
Advertisement
Table of Contents
