Lan Setup; Lan Setup Screen Settings - NETGEAR D6300 User Manual

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The modem router is shipped preconfigured to use private IP addresses on the LAN side and
to act as a DHCP server. The modem router's default LAN IP configuration is:
• LAN IP address. 192.168.0.1
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and should be suitable for most applications. If your network requires a different IP
addressing scheme, make those changes in the LAN Setup screen.
To change the LAN settings:

Note: If you change the LAN IP address of the modem router while
connected through the browser, you are disconnected. You have to
open a new connection to the new IP address and log in again.
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Enter the settings that you want to customize. These settings are described in the following
section, LAN Setup Screen
6. Click the Apply button.
Your settings are saved.

LAN Setup Screen Settings

LAN TCP/IP Setup
• IP Address. The LAN IP address of the modem router.
D6300 WiFi DSL Modem Router
Settings.
NETGEAR genie ADVANCED Home
53