Table of Contents
Advertisement
When you first configured your modem router, two implicit static routes were created. A
default route was created with your ISP as the gateway, and a second static route was
created to your local network for all 192.168.1.x addresses. With this configuration, if you
attempt to access a device on the 134.177.0.0 network, your modem router forwards your
request to the ISP. The ISP forwards your request to the company where you are employed,
and the request is likely to be denied by the company's firewall.
In this case you have to define a static route, telling your modem router that 134.177.0.0
should be accessed through the ISDN modem router at 192.168.1.100. In this example:
•
The Destination IP Address and IP Subnet Mask fields specify that this static route
applies to all 134.177.x.x addresses.
•
The Gateway IP Address field specifies that all traffic for these addresses should be
forwarded to the ISDN modem router at 192.168.1.100.
•
A metric value of 1 works since the ISDN modem router is on the LAN.
•
Private is selected only as a precautionary security measure in case RIP is activated.
To set up a static route:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Static Routes.
The Static Routers page displays.
5.
Click the Add button.
The page adjusts.
6.
In the Route Name field, type a name for this static route (for identification purposes only).
7.
Select the Private check box if you want to limit access to the LAN only. If Private is
selected, the static route is not reported in RIP.
8.
Select the Active check box to make this route effective.
9.
Type the IP address of the final destination.
10.
Type the IP subnet mask for this destination. If the destination is a single host, type
255.255.255.255.
11.
Type the gateway IP address, which has to be a modem router on the same LAN segment
as the WiFi DSL Modem Router.
12.
Type a number from 1 through 15 as the metric value.
D6300 WiFi DSL Modem Router
Advanced Settings
110
- Quick Links:
- Use the Modem Router as a...
Hide quick links:
Advertisement
Table of Contents
