Add Or Edit An Auto Vpn Policy - NETGEAR D6300 User Manual

The BASIC Home page displays.
4. Select ADVANCED > Advanced - VPN > VPN Policies.
The VPN Policies page displays.
The Policy Table contains the following data:
• Enable. Use this check box to enable or disable a policy as required. Click Apply
when you are finished.
• Name. Each policy has a unique name to identify it.
• Type. The type is Auto or Manual.
• Local. IP address or address range on your local LAN. Traffic must be from (or to) the
addresses covered by this policy.
• Remote. IP address or address range of the remote network. Traffic must be to (or
from) the addresses covered by this policy.
• ESP. Encapsulating Security Payload. This setting specifies the encryption protocol
used for the VPN data.
5. Click the appropriate button to manage a VPN policy:
• Edit. Edit (modify) the selected policy. (Select a policy by selecting the radio button.)
• Delete. Delete the selected policy.
• Apply. Save any changes to the Enable setting for each policy.
• Cancel. Discard any unsaved changes to the Enable setting for each policy.
• Add Auto Policy. Display the VPN - Auto Policy screen. When the new policy is
saved, it appears in the bottom row of the Policy Table. See
Policy on page 43.
• Add Manual Policy. Display the VPN - Manual Policy screen. When the new policy is
saved, it appears in the bottom row of the Policy Table. See
VPN Policy

Add or Edit an Auto VPN Policy

An Auto VPN policy uses the IKE (Internet Key Protocol) to exchange and negotiate
parameters for the IPSec SA (security association). Because of this negotiation, not all of the
settings on this VPN gateway have to match the settings on the remote VPN endpoint.
Where settings have match, this requirement is indicated.
To add or edit an Auto VPN Policy:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
D6300 WiFi DSL Modem Router
on page 46.
NETGEAR genie ADVANCED Home
43
Add or Edit an Auto VPN
Add or Edit a Manual