Add Or Edit A Manual Vpn Policy - NETGEAR D6300 User Manual

Wifi dsl modem router
Hide thumbs Also See for D6300:
Table of Contents

Advertisement

-
Remote Identity Data. Enter the data for the selection. When IP Address is
selected, no input is required.
Parameters.
-
Encryption Algorithm. The encryption algorithm used for both IKE and IPSec.
This setting must match the setting used on the remote VPN gateway.
-
Authentication Algorithm. The authentication algorithm used for both IKE and
IPSec. This setting must match the setting used on the remote VPN gateway.
-
Pre-shared Key. The key has to be entered both here and on the remote VPN
gateway.
-
SA Life Time. This setting determines the time interval before the SA (security
association) expires. (It is automatically reestablished as required.) While using a
short time period (or data amount) increases security, it also degrades
performance. It is common to use periods over an hour (3600 seconds) for the SA
lifetime. This setting applies to both IKE and IPSec SAs.
-
Enable PFS (Perfect Forward Secrecy). If enabled, security is enhanced by
ensuring that the key is changed at regular intervals. Also, even if one key is
broken, subsequent keys are no easier to break. (Each key has no relationship to
the previous key.)
This setting applies to both IKE and IPSec SAs. When configuring the remote
endpoint to match this setting, you might need to specify the key group used. For
this device, the key group is the same as the DH Group setting in the IKE section.
7.
Click the Apply button.
Your settings are saved.

Add or Edit a Manual VPN Policy

A Manual VPN policy requires all settings (including the keys) for the VPN tunnel to be
manually input at each end (both VPN endpoints). No third-party server or organization is
involved.
To add or edit a Manual VPN policy:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced - VPN > VPN Policies.
The VPN Policies page displays.
D6300 WiFi DSL Modem Router
NETGEAR genie ADVANCED Home
46

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents