Edit Or Delete A Port Forwarding Entry - NETGEAR D6300 User Manual

8. In the Type list, select the protocol. If you are unsure, select TCP/UDP.
9. In the Start Port field, enter the beginning port number.
• If the application uses a single port, enter the same port number in the End Port field.
• If the application uses a range of ports, enter the ending port number of the range in
the End Port field.
10. Click the Apply button.
The service appears in the list in the Port Forwarding/Port Triggering screen.

Edit or Delete a Port Forwarding Entry

To edit or delete a port forwarding entry:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. In the table, select the radio button next to the service name.
6. To edit a port forwarding entry, click the Edit button.
7. To delete a port forwarding entry, click the Delete button.
Application Example: Making a Local Web Server Public
If you host a web server on your local network, you can use port forwarding to allow web
requests from anyone on the Internet to reach your web server.
To make a local web server public:

1. Assign your web server either a fixed IP address or a dynamic IP address using DHCP
address reservation. In this example, your modem router always gives your web server
an IP address of 192.168.1.33.
2. In the Port Forwarding/Port Triggering screen, configure the modem router to forward the
HTTP service to the local address of your web server at 192.168.1.33. HTTP (port 80) is the
standard protocol for web servers.
3. (Optional) Register a host name with a Dynamic DNS service, and configure your modem
router to use the name as described in
server from the Internet, a remote user has to know the IP address that has been assigned
D6300 WiFi DSL Modem Router
Dynamic DNS
Advanced Settings
106
on page 108. To access your web