NETGEAR D6300 User Manual page 72

To print a document using the NETGEAR USB Control Center:

1. Click the NETGEAR USB Control Center icon
2. Select a printer and click the Connect button.
The printer status changes to Manually connected by Mycomputer. Now only the
computer you are using can use this printer.
3. Use the print feature in your application to print your document.
The NETGEAR USB Control Center automatically connects your computer to the USB
printer and prints the document. If another computer is already connected to the printer,
your print job goes into a queue to wait to be printed.
4. If your document does not print, use the NETGEAR USB Control Center to check the printer
status.
5. To release the printer so that all computers on the network can use it, click the Disconnect
button.
The status changes to Available. Now any computers on the network can use the printer.
6. To exit the utility, select System > Exit.
D6300 WiFi DSL Modem Router
Share a USB Printer
72
.