Factory Settings - NETGEAR D6300 User Manual

Factory Settings

You can return the modem router to its factory settings. Use the end of a paper clip or some
other similar object to press and hold the Restore Factory Settings button on the back of
the router for at least 5 seconds. The modem router resets and returns to the factory settings.
Your device returns to the factory configuration settings shown in the following table.
Table 11. Factory default settings
Feature
Router login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP range
Allow a registrar to configure this
router
DHCP starting IP address
DHCP ending IP address
Local network DMZ
(LAN) continued
Time zone
Time zone adjusted for daylight
savings time
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
D6300 WiFi DSL Modem Router
Default Behavior
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
Autosensing
192.168.0.1
255.255.255.0
Enabled
192.168.0.2 to 192.168.0.254
Enabled
192.168.0.2
192.168.0.254
Disabled
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Supplemental Information
128