Table of Contents
Advertisement
INSTRUMENT PANEL
Labeled surface upward
To load:
1) Put the disc on a tray with its label side
upward.
2) Insert the tray into the magazine.
3) Push the magazine into the CD
changer until it is locked and a click
sound is heard.
4) After loading the magazine, close the
sliding door completely to the left.
3-79
Downloaded from
www.Manualslib.com
CD changer is operated by main unit.
1) Press the power button on the main unit
to turn the audio system on.
2) If a disc is already inserted inside the
CD changer, press the "CD" button.
Playback starts at the beginning of the
track that you were previously listening
to.
3) If a disc is not inserted yet, load a disc
in the magazine. (Refer to "How to
change discs".)
Then, press the "CD" button to play.
Playback starts from the No. 1 disc.
86Z016
CD Changer Play:
To play the CD Changer while operating
the radio, press the "CD" button if a disc is
already inserted in the CD changer.
The mode is transferred to the CD changer
and the CD is played back from the track
that you were previously listening to.
If a disc is not in the CD changer, the mode
is not changed to the CD changer when
you press this button.
Track Up & Down:
The track up & down knob/button allows
you to make quick selections from your
playing disc.
1) To play the next track, rotate this knob
clockwise less than 1 second or press
the track up button once. Each time you
rotate the knob or press the button, the
disc will skip to the next track.
manuals search engine
2) To play the previous track, rotate this
knob counterclockwise less than 1 sec-
ond or press the track down button
once. Each time you rotate the knob or
press the button, the disc will skip to the
previous track.
Cue & Review:
This function allows desired point-search
within a track at a faster than normal play-
back speed.
1) To search for the desired point of a
track, rotate this knob and hold it or
press and hold the track up/down but-
ton. The audio level is reduced and the
disc will play at a faster than normal
playback
speed.
When
reaches the desired point, release the
knob/button
and
normal
resume.
2) To cue (forward) the track, rotate this
knob clockwise or press the track up
button. To review (backward) the track,
rotate this knob counterclockwise or
press the track down button.
Repeat Play:
To repeatedly listen to the current track,
press the "2/RPT" button.
"RPT" is displayed in VFD and the current
track will be played back repeatedly until
this function is canceled.
To cancel this function, press this button
once again.
the
disc
play
will
Hide quick links:
Advertisement
Table of Contents
