Backup Lamps And Tail/Stop Lamps; License Plate Lamps - Suzuki reno 2006 Owner's Manual

Bulb Replacement:
7) Replace the lamp housing into the vehi-
cle using the two screws removed ear-
lier.
8) Close the liftgate.
Downloaded from www.Manualslib.com
Backup Lamps and Tail/Stop
Lamps
To replace a backup lamp or a tail/stop
lamp bulb:
1) Open the liftgate.
2) Remove the protective cover.
3) Remove the bulb socket by turning it
counterclockwise.
4) Remove the bulb from the socket by
pressing the bulb and turning it counter-
clockwise.
5) Install the appropriate bulb into the
socket. See "Replacement Bulbs" in
this section.
6) Replace the bulb socket into the lamp
housing. Turn the bulb socket clock-
wise to secure it.
7) Replace the protective cover and close
the liftgate.
manuals search engine
SERVICE AND APPEARANCE CARE

License Plate Lamps

N4U5045A
To replace a license plate lamp bulb:
1) Remove the two screws shown in the
illustration and the lamp cover.
2) To remove the bulb holder from the
lamp housing, rotate the bulb holder
counterclockwise.
3) Pull the bulb out from the bulb holder.
4) Replace the bulb. See "Replacement
Bulbs" in this section for the proper
bulb.
5) Install the bulb holder into the lamp
housing by rotating the bulb holder
clockwise.
6) Replace the lamp cover.
N4U5029B
5-26