Suzuki reno 2006 Owner's Manual page 143

PLAYING THE RADIO
Power/Volume knob (1):
Press this knob to turn the system on and
off.
Turn this knob clockwise or counterclock-
wise to increase or decrease the volume.
Press this button for longer than two sec-
onds to mute the system.
Finding a Station
AM/FM button (2):
Press this button to select the desired AM
or FM band. The display will show the
selection.
FM1
AM-A
TUNE button (3):
Press this button to select radio stations.
(Manual tuning)
Press the up arrows to select higher fre-
quency stations.
Press the down arrows to select lower fre-
quency stations.
The frequency of the AM band changes 9
KHz each time and the frequency of the
FM band changes 200 KHz each time.
Downloaded from www.Manualslib.com
SEEK/AST button (4):
Seek
Press this button to seek radio stations.
(Seek tuning)
To search for the next receivable higher
frequency station, press the up arrows.
To search for the next receivable lower
station, press the down arrows.
Automatic Store
Press this button for longer than two sec-
onds to use Automatic Store.
FM1's 6 preset stations with the strongest
signal in the region can be automatically
stored. Display will show "AUTO SCAN-
NING". And "SCANNING" will flash on the
display.
FM2 FM-A
Stored stations will flash for a short time on
the display in sequence. Once the stations
are stored, the radio will switch to FM1 and
AM
the first preset station will begin to play.
"FM-A" will appear on the display when lis-
85Z016
tening to the automatically stored stations.
Press the AM/FM button to cancel the
automatic store function.
Preset station buttons (5):
Setting Preset Stations
Up to 18 stations (six FM1, six FM2, and
six AM), can be programmed on the preset
station buttons (5), by performing the fol-
lowing steps:
manuals search engine
INSTRUMENT PANEL
1) Turn the radio on.
2) Press the AM/FM button to select FM1,
FM2, or AM.
3) Tune in the desired station.
4) Press and hold one of the preset station
buttons for longer than two seconds.
And the preset button number will flash
on the display when the station has
been set. Whenever that numbered
preset button is pressed, the memo-
rized station will be tuned in.
5) Repeat the previous four steps for each
preset buttons.
3-70