Vfd Signal; Cassette Operation; Manual Memory; Cassette On / Program Function - Suzuki reno 2006 Owner's Manual

INSTRUMENT PANEL

VFD SIGNAL

START
For more 2 seconds
AUTO STORE
PRESET SCAN
AFTER STORING
3-35
Downloaded from www.Manualslib.com

Manual Memory:

• Select the desired band using the band
selection button.
• Tune in the desired station using the tun-
ing up/down button.
Existing
• Press one of the 6 preset buttons for
frequency
more than 2 seconds.
The preset button number will be dis-
played on the VFD, then the station will
be stored in the memory.
Be stored in
• Using the same method, you can store
Order to 6
the desired stations into the 6 preset but-
buttons
tons.
Blinking
(1 to 6 buttons)
Stored
frequency
86Z007
manuals search engine

CASSETTE OPERATION

1) Press the power button or "TAPE" but-
ton to turn the audio system on.
2) Insert a cassette tape fully into the cas-
sette slot with the exposed tape side
facing to the right.
Then the player starts playback and the
"PLAY" signal appears on the VFD.
3) If a cassette tape is already inserted in
the cassette slot, press the cassette on
button to turn the cassette on.
4) When playing back a Dolby tape, press
the button (Dolby B noise reduction but-
ton) to reduce audible "hiss".
5) To eject a tape, press the tape eject
button.
Then, the radio mode is automatically
activated.
6) To play a cassette when the radio or
CD player is operating, press the cas-
sette on button (if a tape is already
inserted in the cassette slot) or insert a
tape into the cassette slot.
Then the cassette starts playback.

Cassette On / Program Function

To play a cassette when the radio or CD
player is operating, press the TAPE button
if a tape is already inserted in the cassette
slot. The mode is changed to the cassette
mode and the tape is played back.
If a tape is not in the cassette slot, the
mode is not changed to the cassette mode
when you press this button.
To play back the opposite side of a tape
press the cassette on/program button.