Bresser 4 cast PC Instruction Manual page 75

DISABLING WHEN TEMPERATURE ALARMS ARE ACTIVATED
To Disable Temperature Alarm(s):
Press [ ALARM/CHART ] to disable the alarm (s).
VIEWING THE MAX/MIN CHANNEL TEMPERATURE AND HUMIDITY
Each press of [ MEMORY ] rotates channel temperature and humidity display between:
• Current temperature and humidity at remote sensor
• Minimum temperature and humidity at remote sensor
• Maximum temperature and humidity at remote sensor
RESETTING THE MAX/MIN CHANNEL TEMPERATURE AND HUMIDITY MEMORY
Press and hold [ MEMORY ] to clear memory for all channels.
REMOTE SENSOR STATUS
The wave icon above the current channel display shows the connection status of the
corresponding remote sensor:
ICON STATUS
Searching for remote sensor signals
Corresponding remote sensor successfully linked
No signals received for more than 15 minutes
ACTIVATING MAIN CONSOLE UNIT TO SEARCH FOR ALL REMOTE SENSOR SIGNALS
The main console unit may be manually activated to search for signals from all remote sensors.
Press and hold [ ] to enforce a search.
75
GB/IE