Bresser 4 cast PC Instruction Manual page 55

In the event the Meteotime icon change to
interference on the unit. The sources of interference may come from the electronics equipment
such as TV-set, computers, household machines etc. It may also be due to lots of concrete,
metal parts and electrical equipment in the building. It may also be due to your living area if it
is very far away from the Radio-controlled clock tower.
By the first time you power up this product, the language default setting is in German
Language. In order to change it into another language such as English, Spanish, French, Italian,
Dutch, or Swedish, please follow the setup as below.
When you put in the batteries for the first time, wait until the Main Unit receives
• " SUCHE SIG. " (meaning in English is SEARCH SIGNAL); it will display in the
INFORMATION WINDOW
• After several second, " LAND EINST" (meaning in English is COUNTRY) is shown in the
INFORMATION WINDOW
• Press [ SET ] and " ZONE +00 H " is shown in the INFORMATION WINDOW
• Now press [ SET ] again and the " LANGUAGE " will be shown in the INFORMATION
WINDOW, then press [
languages to select, namely German, English, Spanish, French, Italian, Dutch, Swedish
• Press [ SET ] two times to exit the setup.
If you skip the above-mentioned step, the INFORMATION WINDOW will show the default
city FRANKFURT.M. You can change to your desired city in the following steps.
• Press and Hold [ SET ] for 3 second,
then press [ ] or [
country name such as
• Press [ SET ] key to confirm the Country (let's said we select Germany right now), and then
the information window will show
• Then, press [ ] or [
the
• At least press [ SET ] to confirm your selected city.
, that means there are potential sources of
] or [ ] to select your desired language. There are total seven
] key to select the country. For example, you have selected The
means Germany
.
] key to go to your selected city, lets said 'Frankfurt am Main', and
will show in the information window.
55
is shown in the Information Window,
GB/IE