Bresser 4 cast PC Instruction Manual page 46

CONTENT
SECTION 1 SETTING UP METEOTIME WEATHER STATION
1.0 Must Read before Getting Started.
1.1 Introduction
1.2 Getting Start
1.3 Operation Instruction
1.4 Weather Status
SECTION 2 SETTING UP WIRELESS INDOOR/OUTDOOR MEASURING DEVICE FOR
WIND, RAIN, THERMOHYGROMETER AND THE ATOMSPHERE PRESSURE
2.0 Introduction
2.1 Features of Wireless In/Outdoor Measuring Devices
2.2 Installing your Weather Station
2.2.1
2.2.2
2.2.3
2.2.4
2.3 Buttons and Controls
2.4 Navigating between Different Modes
2.4.1
2.4.2
2.4.3
2.4.4
2.5 Setting Pressure parameters during initial start-up
2.6 Indoor and Outdoor Temperature and Humidity
2.7 Wireless Outdoor Rain Guage
2.8 Wireless outdoor Anemometer (Wind Sensor)
3 LED Backlight Options
4 Linking the Weather Station to a Computer
5 Maintenance
6 Technical Specification
Setting up the Thermo-hygro sensors
Setting up the Rain Sensor
Setting up the Anemometer (wind sensor)
Setting Up the Main Unit
Pressure Mode
Temperature and Humidity Mode
Rain Mode
Wind Mode
46